[. . . ] After approximately 30 seconds, NS0045 or NS0046 should become available on your network!
-4-
4. 0 Environment setting
4. 1 Discovery Tool setting:
The Logilink Gigabit NAS NS0045 or NS0046 provides user-friend IP Discovery Tool for easy setting. Double click the "Rescan" button and select NS0045 (or NS0046). [. . . ] · · · · DHCP Service Configuration DHCP Status: Enable or Disable DHCP Service IP pool address range: Setting DHCP range Gateway: Gateway IP address Lease Time: Client's IP address is a time limit
2. DHCP Client List List client computers MAC Address, IP Address, Expires in information
- 10 -
Data/Time: Data and time modification 1. Manually: Click the selected button and the date/time windows will show up for your setting.
- 11 -
2. Auto: You could set up the modification automatically by Time Zone selection or NTP Server selection.
Disk: You could find the Hard Disk and External USB Device information here. When create disk, it will re-scan to check the connected Device.
· ·
Delete: Delete Disk Partition to Device. Repair: If Device is damaged, you can repair Hard Disk here.
- 13 -
4.
S. M. A. R. T is to warn a user or a system administrator of impending drive failure while there is still time to take preventive action.
5.
HDD Power Management: To enable the power saving features built in to your hard drive
- 14 -
For NS0046: With RAID Function 1. Disk Utility: · RAID MODE: When there are two Hard Disks inside the NAS, you could enable this function. · Create: Create the Raid Mode and disk will be formatted.
- 16 -
·
Delete: Delete Disk Partition or Raid to Device.
After deleted Raid, you need to format the Hard Disk connected.
- 17 -
- 18 -
·
Repair: If device is Damage, you can Re-scan and Repair Hard disk.
If RAID mode of "RAID 1", If drive 1 is damaged. The system will display message as long as you device 1 replacement new device.
4. S. M. A. R. T is to warn a user or a system administrator of impending drive failure while there is still time to take preventive action.
- 19 -
5. HDD Power Management: To enable the power saving features built in to your hard drive.
Upgrade: Upgrade the firmware.
- 20 -
5. 1. 3. If the Log files' saving space is not enough, the device will delete the old log information to keep the latest Log information.
5. 1. 4. Create User: Click Create button, and then you can add user name, password and quota setting.
- 21 -
Note: Only the following character can be used "A-Z, a-z, 0-9, -, _" 2. Modify User: Click the Account name in Green then you could modify the User's account information here.
- 22 -
Note: Only the following character can be used "A-Z, a-z, 0-9, -, _"
5. 1. 5 Default : Go back to the factory default setting.
- 23 -
5. 2 Service menu:
5. 2. 1. [. . . ] Click `Apply' button to set up new folder or click `Rescan' button to rescan new folder.
- 30 -
5. 2. 4. BT Download: Setup: · BitTorrent Setup: Modify BitTorrent service setting · BitTorrent Status : If select Enable, then start to setup followings: - Listen port: BitTorrent service communication port. [. . . ]